Sony TV Universal Remote Codes (3-Digit + 4-Digit) That Actually Get You Working Buttons
Updated: February 2026
Sony TVs are usually easy to control with a universal remote , but only if you use a code that matches your remote’s code database and the code length it expects.
The lists below focus on 4-digit Sony TV codes (common on many remotes) and their 3-digit versions when the 4-digit code starts with a zero. If your remote asks for a different length (like 5 digits), use code search or the remote maker’s code finder.
Sony TV 4-digit codes to try
Work through these 4-digit Sony TV codes one at a time, testing after each entry.
- 0128
- 0013
- 0002
- 0071
- 0380
- 0152
Sony TV 3-digit codes (drop the leading zero)
If your remote accepts only 3 digits, try these first.
- 128
- 013
- 002
- 071
- 380
- 152
Fast Sony programming steps (direct code entry)
Most remotes use a setup/program mode plus a device selection step. If you skip device selection, the code may be stored under the wrong device and nothing will happen.
- Turn on the Sony TV (use the TV’s button if you don’t have the original remote).
- Press the TV device key on the universal remote .
- Hold the Setup/Program key until the indicator light stays on or flashes to show it’s ready.
- Enter a Sony code from the list.
- Test Power, Volume, and Input. If Input does not work, try another code.
Why Sony codes can feel ‘close but not perfect’
Universal remotes often have multiple valid Sony TV codes. Two codes may both power the TV off, but only one code might correctly map Volume or Input. That’s why it’s smart to test at least three Sony codes before you stop.
If you use an AV receiver or soundbar, remember: Volume might be controlled by the receiver, not the TV. When troubleshooting, temporarily set the soundbar/receiver volume to a fixed level so you can clearly tell if the TV volume is changing.
When nothing works: use code search
If none of the codes work, your remote may still support Sony through code search (sometimes called auto search). The remote cycles through its code database until the TV reacts, then you save the match.
- Start code search in TV mode.
- Keep the remote pointed at the TV’s IR sensor.
- When the TV turns off or responds, save the code (the save step depends on the remote).
- After saving, test Power, Volume, Mute, and Input to confirm the match is usable.
Quick checklist if your Sony TV won’t respond
- Fresh batteries in the universal remote.
- Correct device mode (TV).
- Correct code length (3 vs 4 digits).
- Line of sight to the TV sensor (soundbars can block it).
Once you find the best code, write it down. That one step saves a lot of time the next time batteries die or the remote gets reset.
What Matters Most: When dealing with Sony TV Universal Remote Codes (3-Digit + 4-Digit) That Actually Get You Working Buttons, patience and the right information are your best tools. You now have both.
Related guides: Universal Remote Code Accepted But Not Working Fixes , Automatic Code Search Universal Remote
Related guides: One For All Remote Samsung Codes , Philips Universal Remote Samsung Codes
Frequently Asked Questions about Sony TV Universal Remote Codes (3-Digit + 4-Digit) That Actually Get You Working Buttons
Is Sony TV Universal Remote Codes (3-Digit + 4-Digit) That Actually Get You Working Buttons suitable for beginners?
Yes, absolutely. Our guide to Sony TV Universal Remote Codes (3-Digit + 4-Digit) That Actually Get You Working Buttons explains all basics clearly.
How much does Sony TV Universal Remote Codes (3-Digit + 4-Digit) That Actually Get You Working Buttons cost?
Costs vary depending on the provider. A comparison is always worth it.
Where can I find more information?
Right here in our expert area for Universal Remote TV Codes.