Philips Universal Remote Codes for Samsung TV

Updated: February 2026

Programming a Philips universal remote for your Samsung TV is simple with these working codes: 0019, 0618, 0060, 1060, 0178, 0030, 0056, and 0644 . Philips remotes are manufactured to high standards and offer excellent compatibility with Samsung televisions.

Step-by-Step Programming

💡 Pro Tip: Compare your situation to the scenarios described below to find the most relevant solution.

Follow these instructions to program your Philips remote:

Ensure your Samsung TV is turned on
Press and hold the Setup button until the LED indicator lights up
Press the TV button to select TV mode
Enter your chosen 4-digit code
The LED will flash twice if the code is valid
Test functionality with Power , Volume , and Channel buttons

Philips Remote Model Compatibility

For the Philips SRP2003 and SRP5107 models, code 0618 provides optimal results with Samsung smart TVs. The Philips SRP3014 works best with code 0019 or 1060. For older Philips remote models, code 0060 has historically shown strong compatibility with Samsung TVs.

Alternative Setup Methods

If direct code entry doesn't work, Philips remotes support an Automatic Code Search function. Press and hold Setup for 3 seconds, press TV, then press Channel Up repeatedly (waiting 1-2 seconds between presses) until your Samsung TV turns off. Press Setup again to save. This method is especially useful when you're unsure of your exact Samsung TV model or when standard codes aren't responding as expected.

In-depth Analysis of Philips Universal Remote Codes for Samsung TV

The process of syncing a universal remote with your television is a common household task that can sometimes be surprisingly complex. The codes we provide are part of a standardized system, but variations between remote manufacturers and television models can introduce challenges. Understanding the underlying technology can help in troubleshooting and successful programming.

Universal remote controls operate by sending infrared (IR) signals to the television's IR receiver. Each function, such as 'Power On', 'Volume Up', or 'Channel Down', is represented by a unique IR code. The challenge is that different brands and models of televisions use different sets of codes. A universal remote is pre-programmed with a library of these code sets, and the 3-digit or 4-digit codes you enter are essentially a shortcut to tell the remote which library to use.

The Importance of a Methodical Approach

When you begin the programming process, it's crucial to be patient and methodical. Rushing through the steps or entering codes randomly is a common source of frustration. Keep a note of which codes you have tried. If the first code on the list doesn't work, move to the next one and test it thoroughly before proceeding. A code might successfully power the TV on and off but fail to control the volume. This indicates a partial match, and you should try another code for full functionality.

Advanced Troubleshooting Techniques

If you've exhausted the list of codes without success, there are several advanced troubleshooting steps you can take. First, double-check the model of your universal remote. Some older remotes may not have the codes for newer televisions. Conversely, a new remote might have dropped support for very old TV models. Check the manufacturer's website for your remote for an updated code list or firmware update.

Another common issue is IR interference. Other electronic devices, and even fluorescent lighting, can emit IR signals that confuse the television's receiver. Try to program your remote in a dimly lit room with other electronics turned off. Also, ensure there is a clear line of sight between the remote and the TV's IR sensor. The sensor is usually located on the bottom bezel of the TV and may need a gentle cleaning with a soft cloth.

The Auto-Code Search Feature: Your Secret Weapon

The auto-code search function is an invaluable tool when manual entry fails. This feature works by systematically sending out every code in the remote's library, one by one. While this process can be time-consuming, it is often the most reliable way to find a working code, especially for less common TV brands. The key is to be ready to press the 'Enter' or 'OK' button on your remote as soon as the TV responds (usually by turning off). If you're too slow, the remote will move on to the next code, and you'll have to start the process again.

When to Consider a High-End Universal Remote

If you find yourself frequently struggling with universal remote programming, it might be time to consider a more advanced model. High-end remotes, such as those from Logitech's Harmony line (though now discontinued, they are still popular), offer a much more user-friendly setup process. These remotes are typically programmed by connecting them to a computer and using software to select your exact TV model from an extensive online database. This eliminates the need for manual code entry and ensures a perfect match.

Furthermore, these premium remotes often support macros, allowing you to program a single button to perform a sequence of actions, such as turning on your TV, soundbar, and streaming device simultaneously. They can also control a wider range of devices, including smart home gadgets, making them a central hub for your entire home entertainment system.

The Future of Remote Controls

The landscape of remote controls is constantly evolving. With the rise of smart TVs, many manufacturers are moving towards Bluetooth or Wi-Fi based remotes that don't require a line of sight. These 'smart' remotes often include features like voice control and touchpad navigation. While universal remotes are adapting to these new technologies, the traditional IR-based universal remote remains a cost-effective and reliable solution for controlling a wide variety of devices. As technology progresses, we can expect to see even more sophisticated and user-friendly solutions for managing our increasingly complex home entertainment systems.

In conclusion, while programming a universal remote can sometimes be a test of patience, a systematic approach combined with an understanding of the underlying technology will almost always lead to success. The codes provided in this guide are your starting point, but don't be afraid to experiment with the auto-code search feature and other troubleshooting techniques to find the perfect setup for your home entertainment system.

Expert Summary: Philips Universal Remote Codes for Samsung TV is a topic where small details matter. The practical tips in this guide will help you navigate it with confidence.

Share this guide:

← Back to Overview

Frequently Asked Questions about Philips Universal Remote Codes for Samsung TV

Is Philips Universal Remote Codes for Samsung TV suitable for beginners?

Yes, absolutely. Our guide to Philips Universal Remote Codes for Samsung TV explains all basics clearly.

How much does Philips Universal Remote Codes for Samsung TV cost?

Costs vary depending on the provider. A comparison is always worth it.

Where can I find more information?

Right here in our expert area for Universal Remote TV Codes.