LG TV Universal Remote Codes (3-Digit + 4-Digit) and Programming Tips

LG TVs are compatible with many universal remotes, but it can take a few tries to land on the best code because different LG model lines and remote databases map buttons differently.

This article focuses on practical LG TV codes in 4-digit format (as commonly published in code lists) and the 3-digit versions you can try when your remote only accepts 3 digits.

LG TV 4-digit codes to try

Enter one 4-digit code at a time, then test Power and Volume immediately.

• 0134
• 0004
• 0050
• 0009
• 0005
• 0155
• 0132
• 0227
• 0338
• 0012
• 0057
• 0080
• 0156

LG TV 3-digit codes (leading-zero versions)

If your remote asks for 3 digits, try these 3-digit versions first.

• 134
• 004
• 050
• 009
• 005
• 155
• 132
• 227
• 338
• 012
• 057
• 080
• 156

How to program LG using direct code entry

Most universal remotes follow this basic sequence. If your remote’s manual uses different button names, the steps still map to the same idea: enter programming mode, pick TV, enter code.

• Turn on the LG TV.
• Press the TV device key on the universal remote .
• Hold Setup/Program until the light indicates programming mode.
• Enter an LG code (3 or 4 digits).
• Test Power , Volume, Mute, and Input/Source.

How to pick the ‘best’ LG code (not just a working one)

Here’s the real-world test that separates a decent code from a frustrating one:

• Power should work every time, not just once.
• Volume should respond instantly with no delay.
• Input/Source should cycle or open the input list.
• Menu should open (this is often missing with partial matches).

If Power works but Input does not, keep trying codes. Input mapping is frequently the first thing to break when the code set is close but not exact.

Common reasons LG pairing fails

• The remote expects 5-digit codes, but you’re entering 3 or 4 digits.
• The TV’s IR sensor is blocked (soundbar, decorative panel, or cabinet lip).
• You are programming the remote under the wrong device mode.

When to use code search instead

If you’ve tried every code in a short list and the TV never reacts, switch to code search (auto-search). It can take longer, but it’s often the only path when your remote’s database uses different LG entries than the ones you found online.

Once code search finds a match, don’t stop at Power. Test Volume and Input before you save the code permanently.

Finally, write down the working LG code somewhere safe. If your remote resets after a battery swap, that note saves you from repeating the entire process.

Expert Summary: LG TV Universal Remote Codes (3-Digit + 4-Digit) and Programming Tips is a topic where small details matter. The practical tips in this guide will help you navigate it with confidence.

Expert Summary: LG TV Universal Remote Codes (3-Digit + 4-Digit) and Programming Tips is a topic where small details matter. The practical tips in this guide will help you navigate it with confidence.

Related guides: Index , Universal Remote Code Accepted But Not Working Fixes

Related guides: Automatic Code Search Universal Remote , One For All Remote Samsung Codes

Share this guide:

← Back to Overview

Frequently Asked Questions about LG TV Universal Remote Codes (3-Digit + 4-Digit) and Programming Tips

Is LG TV Universal Remote Codes (3-Digit + 4-Digit) and Programming Tips suitable for beginners?

Yes, absolutely. Our guide to LG TV Universal Remote Codes (3-Digit + 4-Digit) and Programming Tips explains all basics clearly.

How much does LG TV Universal Remote Codes (3-Digit + 4-Digit) and Programming Tips cost?

Costs vary depending on the provider. A comparison is always worth it.

Where can I find more information?

Right here in our expert area for Universal Remote TV Codes.