Samsung E4 Error Code: Water Supply Problem

The Samsung E4 error code (also shown as 4E on some models) means your washing machine isn't receiving adequate water supply. This error prevents wash cycles from starting or completing because the washer cannot fill to the required water level.

Common Water Supply Problems

E4 errors typically stem from water valves not fully open, low household water pressure, clogged inlet filter screens catching debris, kinked inlet hoses restricting flow, or frozen pipes during winter. These are external issues rather than washer defects.

Complete Fix Guide

• Check that both hot and cold water supply valves are fully turned counterclockwise
• Test water pressure by disconnecting an inlet hose and turning on the valve - should spray strongly
• Turn off both water valves completely
• Disconnect inlet hoses from the back of the washer
• Inspect mesh filter screens inside the washer inlet ports for debris
• Clean screens with a small brush, removing any sediment or particles
• Check inside the hose fittings for screens and clean those too
• Inspect hoses for kinks, damage, or internal blockages
• Reconnect hoses firmly with rubber washers in place
• Turn water supply back on and check for leaks at connections

Water Pressure Verification

If screens are clean but water flow seems weak, check other faucets in your home. If they also have low pressure, you have a household water pressure problem that may require plumber attention. Samsung washers need at least 20 PSI water pressure to operate correctly.

Testing Your Repair

After cleaning filters and ensuring good water flow, start a normal wash cycle. Listen for water entering the drum - you should hear it begin within 30 seconds. Watch through the door to verify water is filling. If water flows properly and fills to the normal level, the E4 error is resolved. If it persists despite good water pressure and clean filters, the inlet valve assembly inside the washer has likely failed and needs replacement.

Related guides: Washer 4E Water Supply Error Fix , F5 E3 Door Unlock Error , F6 E2 Communication Error , F7 E1 Motor Speed Error

Related guides: F8 E2 Dispenser System Error , F9 E1 Drain Timeout Fix , Washer F5 E2 Door Lock Error Fix , Washer Ub Dc Unbalanced Load Error

Share this guide:

← Back to Overview

Frequently Asked Questions about Samsung E4 Error Code: Water Supply Problem

Is Samsung E4 Error Code: Water Supply Problem suitable for beginners?

Yes, absolutely. Our guide to Samsung E4 Error Code: Water Supply Problem explains all basics clearly.

How much does Samsung E4 Error Code: Water Supply Problem cost?

Costs vary depending on the provider. A comparison is always worth it.

Where can I find more information?

Right here in our expert area for washing-machine-errors.