Bosch E01 Error Code: Troubleshooting Heating Element Problems

Updated: February 2026

When your Bosch dishwasher shows E01 , it indicates the heating element isn't working properly. This means your dishes won't get hot water for effective cleaning and sanitizing.

Understanding the E01 Code

💡 Pro Tip: Bookmark this page for quick reference – you will likely need this information again.

The heating element heats water to the optimal temperature for dissolving detergent and removing grease. When it fails or the thermistor malfunctions, the E01 error appears. This could also indicate wiring issues or a faulty control board.

Troubleshooting Steps

  • Step 1: Unplug the dishwasher and turn off the circuit breaker for complete electrical safety.
  • Step 2: Access the heating element by removing the lower front panel and then the lower spray arm and filter assembly.
  • Step 3: Use a multimeter to test the heating element for continuity. Set the meter to ohms and touch the probes to the element terminals. A reading of 15-30 ohms indicates a working element; infinite resistance means it's faulty.
  • Step 4: Check the thermistor (temperature sensor) with the multimeter. It should show resistance that changes with temperature.
  • Step 5: Inspect all wire connections to the heating element for corrosion or loose terminals.
  • Step 6: If the element tests bad, order a replacement specific to your Bosch model number.

Replacing a heating element requires moderate DIY skills. If you're uncomfortable working with electrical components, contact a qualified appliance technician. Remember to always prioritize safety when working with electrical appliances.

Key Takeaway: With the information in this guide about Bosch E01 Error Code : Troubleshooting Heating Element Problems, you are well-prepared to handle this topic confidently. Remember to start with the basics and work your way up if needed.

Related guides: Error Code 8 4 , Dishwasher Error Ftd , Dishwasher Error I10 , Dishwasher Error I20

Related guides: Dishwasher Error I30 , Dishwasher Error C1 , Dishwasher Error C2 , Dishwasher Error C3

Related guides: Dishwasher Error C4 , Dishwasher Error C6 , Dishwasher Error C7 , Dishwasher Error C8

Share this guide:

WhatsApp E-mail
← Back to Overview

Frequently Asked Questions about Bosch E01 Error Code: Troubleshooting Heating Element Problems

Is Bosch E01 Error Code: Troubleshooting Heating Element Problems suitable for beginners?

Yes, absolutely. Our guide to Bosch E01 Error Code: Troubleshooting Heating Element Problems explains all basics clearly.

How much does Bosch E01 Error Code: Troubleshooting Heating Element Problems cost?

Costs vary depending on the provider. A comparison is always worth it.

Where can I find more information?

Right here in our expert area for Dishwasher Error Codes & Troubleshooting.


You might also be interested in

KitchenAid Error Code 7-1: Heating Circuit Failure Repair

Learn more about KitchenAid Error Code 7-1: Heating Circuit Failure Repair...

GE Dishwasher Error Code PF: Power Failure Recovery Steps

Learn more about GE Dishwasher Error Code PF: Power Failure Recovery Steps...

KitchenAid Error Code 4-4: Water Temperature Too Low Fix

Learn more about KitchenAid Error Code 4-4: Water Temperature Too Low Fix...